Fully automated deep learning approach to dental development assessment in panoramic radiographs.

BACKGROUND: Dental development assessment is an important factor in dental age estimation and dental maturity evaluation. This study aimed to develop and evaluate the performance of an automated dental development staging system based on Demirjian's method using deep learning. METHODS: The study included 5133 anonymous panoramic radiographs obtained from the Department of Pediatric Dentistry database at Seoul National University Dental Hospital between 2020 and 2021. The proposed methodology involves a three-step procedure for dental staging: detection, segmentation, and classification. The panoramic data were randomly divided into training and validating sets (8:2), and YOLOv5, U-Net, and EfficientNet were trained and employed for each stage. The models' performance, along with the Grad-CAM analysis of EfficientNet, was evaluated. RESULTS: The mean average precision (mAP) was 0.995 for detection, and the segmentation achieved an accuracy of 0.978. The classification performance showed F1 scores of 69.23, 80.67, 84.97, and 90.81 for the Incisor, Canine, Premolar, and Molar models, respectively. In the Grad-CAM analysis, the classification model focused on the apical portion of the developing tooth, a crucial feature for staging according to Demirjian's method. CONCLUSIONS: These results indicate that the proposed deep learning approach for automated dental staging can serve as a supportive tool for dentists, facilitating rapid and objective dental age estimation and dental maturity evaluation.

Accuracy of different dental age assessment methods to determine chronological age among children with special needs.

AIM: This study aimed to validate the accuracy of dental age (DA) based on the dental development of permanent teeth in children with special needs using Demirjian, Willems, and London Atlas methods and to correlate the dental and chronological age (CA) of children with special needs in Malaysia. MATERIALS AND METHODS: The panoramic radiographic images belonging to children with special needs from the two teaching dental hospitals in Malaysia aged between 5 and 16 years were included in the study. The evaluation was performed by two observers using three methods (London Atlas, Demirjian, and Willems methods) to estimate the accurate DA. The outcome was determined by comparing the mean of the DA and CA. RESULTS: A total of 52 panoramic radiographs were available for the analysis. The London Atlas and Demirjian methods overestimated the DA with a mean of 0.05 and 0.20 years, respectively, while the Willems method underestimated by 0.19 years. The London Atlas method was highly precise and accurate, while Demirjian and Willems methods were the least precise and accurate. CONCLUSION: The London Atlas method of DA estimation is highly accurate and valid for children with special needs in the Malaysian population, followed by the Willems and Demirjian methods.

Predicting chronological age of 14 or 18 in adolescents: integrating dental assessments with machine learning.

AIM: Age estimation plays a critical role in personal identification, especially when determining compliance with the age of consent for adolescents. The age of consent refers to the minimum age at which an individual is legally considered capable of providing informed consent for sexual activities. The purpose of this study is to determine whether adolescents meet the age of 14 or 18 by using dental development combined with machine learning. METHODS: This study combines dental assessment and machine learning techniques to predict whether adolescents have reached the consent age of 14 or 18. Factors such as the staging of the third molar, the third molar index, and the visibility of the periodontal ligament of the second molar are evaluated. RESULTS: Differences in performance metrics indicate that the posterior probabilities achieved by machine learning exceed 93% for the age of 14 and slightly lower for the age of 18. CONCLUSION: This study provides valuable insights for forensic identification for adolescents in personal identification, emphasizing the potential to improve the accuracy of age determination within this population by combining traditional methods with machine learning. It underscores the importance of protecting and respecting the dignity of all individuals involved.

[Review of age assessment methods of children and adolescents by teeth X-rays]. / Obzor metodov otsenki vozrasta detei i podrostkov po rentgenogrammam zubov.

Interest in the topic of age assessment for forensic medical identification of personality has not decreased for over the past decade. Establishing an exact age have a critical importance for law enforcement authorities, for example in case of wrongdoing by illegal migrants without identity documents. The search and systemic analysis of published researches devoted to age assessment by dental status in children and adolescents with subsequent updating of the directions of development in this scientific subject theme and the possibility of their realization in practice in the Russian Federation were carried out in order to have an objective concept of used methods of dental status assessment in the world practice.

A comparison of estimated age based on pulp volume from cone beam computed tomography (CT) images and panoramic radiography data with chronological age.

This retrospective study was conducted to evaluate different methods for dental age estimation in children and to examine the feasibility of using cone beam computed tomography (CBCT) data for age estimation. A total of 200 radiographic records (both digital panoramic radiographs and CBCTs) were acquired from 100 children aged 9 to 16 years, all taken on the same dates. Radiographic data was acquired from archived records and included both panoramic radiography and CBCT data belonging to the same individual. CBCT was used when panoramic radiographic data was insufficient. The pulp volume and pulp/tooth volume ratio of the left first molar teeth in the mandible were calculated from the CBCT data using MIMICS software. In addition, age was estimated by the Demirjian and Willems methods from data obtained from panoramic radiography images. Statistical analyses and linear regression analysis were performed as necessary. There was a statistically significant difference between the mean difference between the Demirjian method and chronological age, and between the Willems method and chronological age (p < 0.001). Statistically significance was achieved in a linear regression model created from pulp volume (R2 = 0.098) and pulp/tooth volume ratio (R2 = 0.395) data for the estimated dental age analysis (p < 0.001) and a negative correlation was observed with chronological age. When compared estimated dental age from CBCT data with chronological age, the pulp/tooth volume ratio method yielded results closer to chronological age than using only pulp volume data. When considering both panoramic radiographic age estimation methods and age estimation methods using CBCT data, we found that the results obtained with the Willems method, a panoramic radiographic age estimation technique, provided the closest results to the chronological age. More contributions should be made to the literature regarding the feasibility of age estimation using pulp and tooth volume as an alternative method.

Correlation between dental and skeletal maturity in Korean children based on dental maturity percentile: a retrospective study.

BACKGROUND: The correlation between dental maturity and skeletal maturity has been proposed, but its clinical application remains challenging. Moreover, the varying correlations observed in different studies indicate the necessity for research tailored to specific populations. AIM: To compare skeletal maturity in Korean children with advanced and delayed dental maturity using dental maturity percentile. DESIGN: Dental panoramic radiographs and cephalometric radiographs were obtained from 5133 and 395 healthy Korean children aged between 4 and 16 years old. Dental maturity was assessed with Demirjian's method, while skeletal maturity was assessed with the cervical vertebral maturation method. Standard percentile curves were developed through quantile regression. Advanced (93 boys and 110 girls) and delayed (92 boys and 100 girls) dental maturity groups were defined by the 50th percentile. RESULTS: The advanced group showed earlier skeletal maturity in multiple cervical stages (CS) in both boys (CS 1, 2, 3, 4, and 6) and girls (CS 1, 3, 4, 5, and 6). Significant differences, as determined by Mann-Whitney U tests, were observed in CS 1 for boys (p = 0.004) and in CS 4 for girls (p = 0.037). High Spearman correlation coefficients between dental maturity and cervical vertebral maturity exceeded 0.826 (p = 0.000) in all groups. CONCLUSION: A correlation between dental and skeletal maturity, as well as advanced skeletal maturity in the advanced dental maturity group, was observed. Using percentile curves to determine dental maturity may aid in assessing skeletal maturity, with potential applications in orthodontic diagnosis and treatment planning.

Considerations for age estimation accuracy: Method-derived outcomes and practitioner interpretations.

Recent research observed 92% accuracy for age-at-death estimations by U.S. forensic anthropologists. The present study compares this case report level accuracy to method level accuracy for the most commonly used methods in U.S. casework, drawing from the Forensic Anthropology Database for Assessing Methods Accuracy (FADAMA). Method application rate (i.e., how often a method is used in casework) was analyzed for n = 641 cases and identified 15 methods with an application rate >45 cases, and the present study focused further analyses on these 15 methods. Of the 15, only four yielded accuracies greater than or equal to the 92% documented for case-report level accuracy. The other 11 methods produced accuracy rates ranging from 54% to 91%, with six of these below 70% This disconnect between highly accurate age estimations at the case report level compared to the poor performance at method level suggests that practitioner interpretation and synthesis of the methods' outcomes is a critical step for increasing the accuracy rates of the age estimations as reported on the final case report. This inference was further supported by the study's results which indicated that practitioner interpretations of frequently used method combinations improve accuracy and age range width of age estimation. The study also performed a Fisher's Exact test to assess whether case report-level accuracy differed with the number of aging methods used in a case, and found no significant differences.

Binary decisions of artificial intelligence to classify third molar development around the legal age thresholds of 14, 16 and 18 years.

Third molar development is used for dental age estimation when all the other teeth are fully mature. In most medicolegal facilities, dental age estimation is an operator-dependent procedure. During the examination of unaccompanied and undocumented minors, this procedure may lead to binary decisions around age thresholds of legal interest, namely the ages of 14, 16 and 18 years. This study aimed to test the performance of artificial intelligence to classify individuals below and above the legal age thresholds of 14, 16 and 18 years using third molar development. The sample consisted of 11,640 panoramic radiographs (9680 used for training and 1960 used for validation) of males (n = 5400) and females (n = 6240) between 6 and 22.9 years. Computer-based image annotation was performed with V7 software (V7labs, London, UK). The region of interest was the mandibular left third molar (T38) outlined with a semi-automated contour. DenseNet121 was the Convolutional Neural Network (CNN) of choice and was used with Transfer Learning. After Receiver-operating characteristic curves, the area under the curve (AUC) was 0.87 and 0.86 to classify males and females below and above the age of 14, respectively. For the age threshold of 16, the AUC values were 0.88 (males) and 0.83 (females), while for the age of 18, AUC were 0.94 (males) and 0.83 (females). Specificity rates were always between 0.80 and 0.92. Artificial intelligence was able to classify male and females below and above the legal age thresholds of 14, 16 and 18 years with high accuracy.

Resolving the non-uniformity in the feature space of age estimation: A deep learning model based on feature clusters of panoramic images.

Age estimation is important in forensics, and numerous techniques have been investigated to estimate age based on various parts of the body. Among them, dental tissue is considered reliable for estimating age as it is less influenced by external factors. The advancement in deep learning has led to the development of automatic estimation of age using dental panoramic images. Typically, most of the medical datasets used for model learning are non-uniform in the feature space. This causes the model to be highly influenced by dense feature areas, resulting in adequate estimations; however, relatively poor estimations are observed in other areas. An effective solution to address this issue can be pre-dividing the data by age feature and training each regressor to estimate the age for individual features. In this study, we divide the data based on feature clusters obtained from unsupervised learning. The developed model comprises a classification head and multi-regression head, wherein the former predicts the cluster to which the data belong and the latter estimates the age within the predicted cluster. The visualization results show that the model can focus on a clinically meaningful area in each cluster for estimating age. The proposed model outperforms the models without feature clusters by focusing on the differences within the area. The performance improvement is particularly noticeable in the growth and aging periods. Furthermore, the model can adequately estimate the age even for samples with a high probability of classification error as they are located at the border of two feature clusters.

Three decades after the publication of the Lamendin method for adult age-at-death estimation: Methodological evolution of the procedure and interpretations.

More than three decades have passed since the publication of Lamendin et al.'s proposal in 1992. Over this time, numerous investigations have been conducted to assess the applicability of the technique in different populations with acceptable results in terms of estimation errors. The proposal by Lamendin and colleagues remains relevant today, and has made a significant contribution to adult age-at-death estimation due to its simplicity, repeatability, replicability, and high performance. Indeed, significant progress towards systematizing and strengthening the procedure has been reported in the published literature. One noteworthy advancement is the development of an international database that supports the use of Bayesian statistics for age-at-death estimation. This resource plays a crucial role in standardizing the methodology and improving the reliability for obtaining more reliable results on a global scale. The aim of this study is to investigate the historical evolution of the technique, to assess the accuracy of the results obtained by different analytic procedures, and to explore its impact in forensic applications through a systematic analysis of the specialized literature on this field. The current state of research indicates that this type of methodological research is an ongoing process, far from being completed. Many questions and challenges that require further attention to address effectively these issues remain unanswered, such as the development of non-linear regressions and probabilistic approaches, the deepening of procedures that improve global approximations, and the intensification of research focused on achieving more accurate estimations among individuals over 70 years-old. However, studies generally agree that the Lamendin technique works well for individuals between the ages of 30-60 years. It is still in force today, although the method has been significantly perfected. Despite the degree of research development in this area, further efforts are needed to improve the understanding and performance of these kinds of procedures. This will ultimately lead to an improvement in the accuracy and reliability of forensic investigation results worldwide.

Decision tree analysis for age estimation in living individuals: integrating cervical and dental radiographic evaluations within a South African population.

Age estimation in living individuals around the age of 18 years is medico-legally important in undocumented migrant cases and in countries like South Africa where many individuals are devoid of identification documents. Establishing whether an individual is younger than 18 years largely influences the legal procedure that should be followed in dealing with an undocumented individual. The aim of this study was to combine dental third molar and anterior inferior apophysis ossification data for purposes of age estimation, by applying a decision tree analysis. A sample comprising of 871 black South African individuals (n = 446 males, 425 = females) with ages ranging between 15 and 24 years was analyzed using panoramic and cephalometric radiographs. Variables related to the left upper and lower third molars and cervical vertebral ring apophysis ossification of C2, C3, and C4 vertebrae analyzed in previous studies were combined in a multifactorial approach. The data were analyzed using a pruned decision tree function for classification. Male and female groups were handled separately as a statistically significant difference was found between the sexes in the original studies. A test sample of 30 individuals was used to determine if this approach could be used with confidence in estimating age of living individuals. The outcomes obtained from the test sample indicated a close correlation between the actual ages (in years and months) and the predicted ages (in years only), demonstrating an average age difference of 0.47 years between the corresponding values. This method showed that the application of decision tree analysis using the combination of third molar and cervical vertebral development is usable and potentially valuable in this application.

Machine learning assessment of dental age classification based on cone-beam CT images: a different approach.

OBJECTIVES: Machine learning (ML) algorithms are a portion of artificial intelligence that may be used to create more accurate algorithmic procedures for estimating an individual's dental age or defining an age classification. This study aims to use ML algorithms to evaluate the efficacy of pulp/tooth area ratio (PTR) in cone-beam CT (CBCT) images to predict dental age classification in adults. METHODS: CBCT images of 236 Turkish individuals (121 males and 115 females) from 18 to 70 years of age were included. PTRs were calculated for six teeth in each individual, and a total of 1416 PTRs encompassed the study dataset. Support vector machine, classification and regression tree, and random forest (RF) models for dental age classification were employed. The accuracy of these techniques was compared. To facilitate this evaluation process, the available data were partitioned into training and test datasets, maintaining a proportion of 70% for training and 30% for testing across the spectrum of ML algorithms employed. The correct classification performances of the trained models were evaluated. RESULTS: The models' performances were found to be low. The models' highest accuracy and confidence intervals were found to belong to the RF algorithm. CONCLUSIONS: According to our results, models were found to be low in performance but were considered as a different approach. We suggest examining the different parameters derived from different measuring techniques in the data obtained from CBCT images in order to develop ML algorithms for age classification in forensic situations.

OPG-based dental age estimation using a data-technical exploration of deep learning techniques.

Dental age estimation, a cornerstone in forensic age assessment, has been extensively tried and tested, yet manual methods are impeded by tedium and interobserver variability. Automated approaches using deep transfer learning encounter challenges like data scarcity, suboptimal training, and fine-tuning complexities, necessitating robust training methods. This study explores the impact of convolutional neural network hyperparameters, model complexity, training batch size, and sample quantity on age estimation. EfficientNet-B4, DenseNet-201, and MobileNet V3 models underwent cross-validation on a dataset of 3896 orthopantomograms (OPGs) with batch sizes escalating from 10 to 160 in a doubling progression, as well as random subsets of this training dataset. Results demonstrate the EfficientNet-B4 model, trained on the complete dataset with a batch size of 160, as the top performer with a mean absolute error of 0.562 years on the test set, notably surpassing the MAE of 1.01 at a batch size of 10. Increasing batch size consistently improved performance for EfficientNet-B4 and DenseNet-201, whereas MobileNet V3 performance peaked at batch size 40. Similar trends emerged in training with reduced sample sizes, though they were outperformed by the complete models. This underscores the critical role of hyperparameter optimization in adopting deep learning for age estimation from complete OPGs. The findings not only highlight the nuanced interplay of hyperparameters and performance but also underscore the potential for accurate age estimation models through optimization. This study contributes to advancing the application of deep learning in forensic age estimation, emphasizing the significance of tailored training methodologies for optimal outcomes.

Three-dimensional surface area analyses of developing maxillary second premolar root apices for age estimation using CBCT images.

Three-dimensional surface area analyses of developing root apices for age estimation in children and young adults have shown promising results. The current study aimed to apply this three-dimensional method to develop a regression model for estimating age in Malaysian children aged 7 to 14 using developing maxillary second premolars. A training sample of 155 cone-beam computed tomography scans (83 Malays and 72 Chinese) was analysed, and the formula was subsequently validated on an independent sample of 92 cone-beam computed tomography scans (45 Malays and 47 Chinese). The results showed a strong correlation (r = 94 %) between the chronological age as a dependent variable and the predictor variables, including root surface area of the apex, sex, ethnicity, and root development status (open/closed apices). For this model, the predictor variables accounted for 88.4 % of the variation in age except sex and ethnicity. A mean absolute error value of 0.42 indicated that this model can be reliably used for Malaysian children. In conclusion, this study recognises the method of three-dimensional surface area analyses as a valuable tool for age estimation in forensic and clinical practice. Further studies are highly recommended to assess its effectiveness across different demographic groups.

Automatic dental age calculation from panoramic radiographs using deep learning: a two-stage approach with object detection and image classification.

BACKGROUND: Dental age is crucial for treatment planning in pediatric and orthodontic dentistry. Dental age calculation methods can be categorized into morphological, biochemical, and radiological methods. Radiological methods are commonly used because they are non-invasive and reproducible. When radiographs are available, dental age can be calculated by evaluating the developmental stage of permanent teeth and converting it into an estimated age using a table, or by measuring the length between some landmarks such as the tooth, root, or pulp, and substituting them into regression formulas. However, these methods heavily depend on manual time-consuming processes. In this study, we proposed a novel and completely automatic dental age calculation method using panoramic radiographs and deep learning techniques. METHODS: Overall, 8,023 panoramic radiographs were used as training data for Scaled-YOLOv4 to detect dental germs and mean average precision were evaluated. In total, 18,485 single-root and 16,313 multi-root dental germ images were used as training data for EfficientNetV2 M to classify the developmental stages of detected dental germs and Top-3 accuracy was evaluated since the adjacent stages of the dental germ looks similar and the many variations of the morphological structure can be observed between developmental stages. Scaled-YOLOv4 and EfficientNetV2 M were trained using cross-validation. We evaluated a single selection, a weighted average, and an expected value to convert the probability of developmental stage classification to dental age. One hundred and fifty-seven panoramic radiographs were used to compare automatic and manual human experts' dental age calculations. RESULTS: Dental germ detection was achieved with a mean average precision of 98.26% and dental germ classifiers for single and multi-root were achieved with a Top-3 accuracy of 98.46% and 98.36%, respectively. The mean absolute errors between the automatic and manual dental age calculations using single selection, weighted average, and expected value were 0.274, 0.261, and 0.396, respectively. The weighted average was better than the other methods and was accurate by less than one developmental stage error. CONCLUSION: Our study demonstrates the feasibility of automatic dental age calculation using panoramic radiographs and a two-stage deep learning approach with a clinically acceptable level of accuracy.

Age estimation in adults by canine teeth: a systematic review of the Cameriere method with meta-analysis on the reliability of the pulp/tooth area ratio.

The age estimation of an adult using methods accessible to the forensic routine is a goal pursued by forensic experts. Cameriere, Ferrante and Cingolani (2004) proposed the use of the pulp/tooth area ratio of canine teeth as a promising variable, but its reliability has shown conflicting results in the scientific literature. This article aimed to carry out a systematic review with meta-analysis to verify whether the pulp/tooth area ratio of canine teeth includes a variable that can be used alone to estimate dental age in adults. A systematic search was carried out in six databases using keywords related to the theme in Portuguese, English, and Spanish. The study selection process followed pre-established eligibility criteria. Assessments were carried out regarding risk of bias and publication bias of selected studies, and meta-analysis was carried out considering Pearson's correlation coefficient between pulp/tooth area ratio and chronological age as effect measure. Most selected studies showed low risk of bias; no publication bias was found when all studies were considered, and potential publication bias was found when outliers were removed. Despite the high heterogeneity among studies and the need for more research, it could be observed that the pulp/tooth area ratio has strong negative correlation with chronological age, and the pulp/tooth area ratio could be derived from both periapical radiographs and orthopantomographs. Therefore, it is suggested that there is scientific evidence that the pulp/tooth area ratio obtained from canine teeth is reliable for dental age estimation in adults.

Dental age assessment in the living: a comparison of two common stage classifications for assessing radiographic visibility of the root canals in mandibular third molars.

After dentition is complete, degenerative tooth characteristics can be used for dental age assessment. Radiological assessment of the visibility of the root canals of the mandibular third molars in dental panoramic radiographs (DPRs) is known to be one such suitable feature. Essentially, two different stage classifications are available for evaluating the visibility of the root canals of mandibular third molars in the DPR. The aim of this study was to determine if one method outperforms the other. Therefore, the 2010 method of Olze et al. was directly compared to the 2017 method of Lucas et al. in the 2020 modification of Al Qattan et al. To this end, 233 DPRs from 116 females and 117 males aged 20.0 to 40.9 years were evaluated by three independent experienced examiners. In addition, one examiner ran two independent evaluations. Correlation between age and stage was investigated, and the inter- and intra-rater reliability was estimated for both methods. Correlation between age and stage was higher with the Olze method (Spearman rho 0.388 [95% CI 0.309, 0.462], males and 0.283 [95% CI 0.216, 0.357], females) than the Lucas method (0.212 [95% CI 0.141, 0.284], males and 0.265 [95% CI 0.193, 0.340], females). The intra-rater repeatability of the Olze method (Krippendorff's α = 0.576 [95% CI 0.508, 0.644], males and α = 0.592 [95% CI 0.523, 0.661], females) was greater than that for the Lucas method (intra-rater α = 0.422 [95% CI 0.382, 0.502], males and α = 0.516 [95% CI 0.523, 0.661], females). Inter-rater reproducibility was also greater for the Olze method (α = 0.542 [95% CI 0.463, 0.620], males and α = 0.533 [95% CI 0.451, 0.615], females) compared to the Lucas method (α = 0.374 [95% CI 0.304, 0.443], males and α = 0.432 [95% CI 0.359, 0.505], females). The method of Olze et al. was found to present marginal advantages to the Lucas et al. method across all examinations and may be a more appropriate method for application in future studies.

Prevalence of abnormalities seen on orthopantomograms performed for forensic age estimation in unaccompanied minor asylum seekers.

OBJECTIVES: Evaluate the prevalence of radiological anomalies on orthopantomograms (OPT) performed as part of forensic age estimation in unaccompanied minors. METHODS: This is a retrospective study conducted on 208 OPT examinations requested by a magistrate. These OPTs were interpreted independently by two readers to establish the number of missing teeth (MT), presence of dental fillings (DF), and dental anomalies (DA). The presence of radiolucent (RL), radiopaque, and mixed lesions was also assessed. RESULTS: Most radiologic anomalies were RL, detected on 41% and 39% of the subjects evaluated for R1 and R2, respectively, with a mean of 1.3 ± 2.4 (1-16) and 1.1 ± 2 (1-13) RL lesions per subject. Among the RL identified, the majority were dental (70% for R1 and 65% for R2), all of which had a suspected infectious origin. Among readers, 43% and 41% of the subjects evaluated presented MT, 21% and 15% presented DF, and 22% and 20% presented DA for R1 and R2, respectively. The inter- and intra-observer reproducibility for OPT classification was considered excellent (Kappa = 0.84, 95% CI 0.78-0.90, and Kappa = 0, 95, 95% CI 0.86-0.99). DISCUSSION: There was a non-negligible prevalence of radiological anomalies in OPT studies performed for forensic age estimation. Most of these lesions were suspected to be infectious in origin, potentially requiring medical care. This constitutes an ethical dilemma inherent in the judicial expertise injunction requiring a limited specific response. CLINICAL RELEVANCE STATEMENT: This study highlights a non-negligible prevalence of supposedly infectious radiological abnormalities. The restricted possibility for the legal expert to declare these abnormalities raises ethical and medical questions. KEY POINTS: • Orthopantomograms can be performed as part of forensic age estimation. • Results indicate the majority of radiological anomalies detected on OPTs were of suspected infectious origin. • These findings give rise to ethical and medical questions about the way in which these forensic examinations are carried out.

Using cementochronology to assess the seasonality of catastrophic events in medieval mass graves (Kutná Hora-Sedlec, Czechia, 14th century): Preliminary results.

While season-of-death estimation using cementochronology is routine in archaeozoology, its use is much less frequent in bioarchaeology. Based on the character of the outermost increment (bright or dark), two seasons (spring/summer, autumn/winter) can be distinguished. Although many studies mention its potential and possible use in forensic anthropology or bioarchaeology, few exist with estimation results. This study aimed to apply cementochronology-a histological method based on counting and assessing regular circa-annual acellular cementum increments-to 42 individuals from medieval mass graves from Kutná Hora-Sedlec (Czechia, 14th century) to estimate the season-of-death. The mass graves belong to two stratigraphically distinct groups; written and archaeological sources relate them to two catastrophic events (the famine of 1318 and the plague epidemic of 1348-1350). Using cementochronology, we distinguished two distinct seasons corresponding to the two groups of graves, with individuals from the first group dying predominantly in spring/summer, while those from the second group died in autumn/winter. Taking into account the typical seasonal dynamics of epidemics, the results would be more in line with written sources. However, during the evaluation, we faced difficulties identifying the outermost increment and detecting the dark (thinner) increment; we recommend including only young and middle-aged adults in future studies, due to the difficulty of evaluation, and to consider the readability of the tissue (often affected by diagenesis). In conclusion, cementochronology has potential in the context of estimating the season-of-death, but the technical possibilities for enhancing the outermost increment need to be addressed, and the amount of data analysed expanded.

Estimating chronological age through learning local and global features of panoramic radiographs in the Korean population.

This study suggests a hybrid method based on ResNet50 and vision transformer (ViT) in an age estimation model. To this end, panoramic radiographs are used for learning by considering both local features and global information, which is important in estimating age. Transverse and longitudinal panoramic images of 9663 patients were selected (4774 males and 4889 females with a mean age of 39 years and 3 months). To compare ResNet50, ViT, and the hybrid model, the mean absolute error, mean square error, root mean square error, and coefficient of determination (R2) were used as metrics. The results confirmed that the age estimation model designed using the hybrid method performed better than those using only ResNet50 or ViT. The estimation is highly accurate for young people at an age with distinct growth characteristics. When examining the basis for age estimation in the hybrid model through attention rollout, the proposed model used logical and important factors rather than relying on unclear elements as the basis for age estimation.